Learn how to reduce your carbon footprint with the patented water valve from Water
Select®. Start saving 20% of the water used each time the shower is used. Save even
more when the valve is turned to a slow trickle while soaping and bathing. Reduce
both the energy used & your carbon footprint. Simply install it between your existing
shower head and the pipe it is attached to.
Reduce Your Carbon Footprint With Water Select®
Hot water use alone can be lowered by approximately 20% by retrofitting water using
fixtures and appliances. Hot water use in residential homes could be lowered by billions
of gallons per year if every home installed appliances and fixtures that were more
effective.
By installing the patented Water Select® valve you can reduce your carbon footprint
by using less water. Using less water in the shower means less hot water from the
water heater which uses electricity and/or gas. Less waste water runs down the drain
resulting in lower sewage cost.
There is a long cycle and process involved with providing fresh water to populated
cities that most people are not aware of. It is not cheap to bring that water into
your home or to recycle and clean it up at the water processing plant.
The bottom line is by using a patented Water Select® valve you can save 20% of the
water required to take a shower even if you do not use the lever to stop the water
when soaping & bathing. Doing this will save even more and reduce your carbon footprint.
Water Select® Is Conservation With Immediate Effect.