Learn how to reduce your carbon footprint with the patented water valve from Water Select®. Simply install it between your existing shower head and the pipe it is attached to.
Start saving 20% of the water used each time the shower is used. Save even more when the valve is turned to a slow trickle while soaping and bathing. Reduce the both the energy used & your carbon footprint.
Hot water use alone can be lowered by approximately 20% by retrofitting water using fixtures and appliances. Hot water use in residential homes could be lowered by billions of gallons per year if every home installed appliances and fixtures that were more effective.
By installing the patented valve by Water Select® you can reduce your carbon footprint by using less water. Using less water in the shower means less hot water from the water heater which uses electricity. Less waste water runs down the drain resulting in lower sewage cost.
It is not cheap to bring that water into your home or to recycle and clean it up at the water processing plant when you are done with it. There is a long cycle and process involved with providing fresh water to populated cities that most people are not aware of.
The bottom line is by using a patented Water Select® valve you can save 20% of the water required to take a shower even if you do not use the lever to stop the water when soaping & bathing. Doing this will save even more and reduce your carbon footprint.